Cutting saws need to be inspected and maintained on a regular basis, which can protect the machine, extend the service life of the machine, allow the machine to exert its greatest power, and bring us more value and benefits. What are the contents of the cold cutting saw that needs to be checked every day?
1. Check whether there is water or oil debris around the equipment, and clean it up in time.
2. Check the equipment and fixtures for iron filings and other debris, and clean them up in time.
3. Lubricating oil should be added to the guide rail and the sliding block. Pay attention not to add dry oil. Clean the iron chips on the guide rail every day.
4. Check whether the oil pressure and air pressure are within the specified range (pressure gauge of hydraulic station, air pressure of furniture cylinder, air pressure of speed measuring cylinder, air pressure of pinch roller cylinder)
5. Check whether the bolts and the screws on the fixture are loose.
6. Check whether the oil cylinder or cylinder of the fixture is leaking or leaking or rusting, and it should be replaced in time.
7. Check the wear of the saw blade and replace it according to the situation. (Because the material and cutting speed are different, it is recommended to determine whether to replace the saw blade according to the quality of the cut and the sound of the sawing.) To replace the saw blade, use a wrench instead of a hammer. The new saw blade needs to confirm the diameter of the saw blade, the number of teeth, and the thickness of the saw blade.
8. Check the position and wear of the steel brush, and adjust or replace it in time.
9. Linear guide rails and bearings are cleaned and oiled every day.
10.Check whether the pipe diameter, wall thickness and steel pipe length are set correctly, and the pipe length should be calibrated once a day.
Regular inspection of cold cut saws is very important. For more information about welded pipe equipment,ERW Tube Mill, Pipe Mill ,welcome to contact us.
Hebei Tubo Machinery Co.,Ltd With more than 130 sets all types of CNC machining equipments, Hebei Tubo Machinery Co.,Ltd., manufactures and exported to over 15 countries of welded tube/pipe mill, ERW pipe making machine, Pipe Making Machine ,and slitting line, as well as auxiliary equipments for more than 15 years.
TUBO Machinery, as a partner of users, provides not only high precision machine products, but also technical support everywhere & anytime.
Post time: Jul-16-2021